Your cart is empty

High-pressure blower HD240

Article no.: 5100200
+

3,65 m³ / min - 27000 Pa

HERZ– high-pressure blower:

  • Low noise level
  • Maintenance-free
  • Compact design
  • Completely oil-free


The operating temperature of the high-pressure blower may not exceed 60°C.

Specail version also available with UL cerification

On request, the blowers are also available for utilisation with frequency converters for speed control. In this case, motors are provided with a phase separator. On request, the device can be provided with a PTC resistor, whose signal can be analysed using an optional tripping unit. Technical data are not changed.

In the standard version the blowers are provided with a stainless steel filter on the intake side, which can be used again after it has been cleaned with compressed air. When a fine filter is used, the stainless steel filter can be removed.

Here you can find all models in comparison [click here!]

Technical data

Volumetric current [m³/min] ₁ 3,65
₂ 4,42
Overall pressure difference [Pa] ₁ 25000
₂ 26000
Voltage [V] ₁ 3x 230 - 400
₂ 3x 265 - 460
Frequency [hz] ₁ 50
₂ 60
Current draw [A] ₁ 5,1
₂ 5,1
Speed [rpm] ₁ 2900
₂ 3500
Motor power [KW] ₁ 2,20
₂ 2,55
Noise pressure level [LpA(dp)] ₁ 68,8
₂ 70,8
Weight [kg] ₁ 26,5
₂ 26,5
Intake opening [mm] Ø 60 mm (outside)
Exhaust opening [Ø mm] Ø 60 mm (outside)
Ambient temp. [°C] -15°C bis +40°C
Type of protection IP 54
Measurements L x B x H [mm] 397 x327 x 365
Ask about this product

Attachments

Back