Your cart is empty

High-pressure blower HD140

Article no.: 5103429
+

HERZ– high-pressure blower:

  • Low noise level
  • Maintenance-free
  • Compact design
  • Completely oil-free


The operating temperature of the high-pressure blower may not exceed 60°C.

Specail version also available with UL cerification

On request, the blowers are also available for utilisation with frequency converters for speed control. In this case, motors are provided with a phase separator. On request, the device can be provided with a PTC resistor, whose signal can be analysed using an optional tripping unit. Technical data are not changed.

In the standard version the blowers are provided with a stainless steel filter on the intake side, which can be used again after it has been cleaned with compressed air. When a fine filter is used, the stainless steel filter can be removed.

Here you can find all models in comparison [click here!]

Technical data

Volumetric current [m³/min] ₁ 1,45
₂ 1,7
Overall pressure difference [Pa] ₁ 14000
₂ 14500
Voltage [V] ₁ 200 - 277; 345 - 480
₂ 200 - 277; 345 - 480
Frequency [hz] ₁ 50
₂ 60
Current draw [A] ₁ 2,10 - 2,85; 1,20 – 1,65
₂ 2,40 – 2,70; 1,35 – 1,55
Speed [rpm] ₁ 2810
₂ 3390
Motor power [KW] ₁ 0,46
₂ 0,62
Noise pressure level [LpA(dp)] ₁ 65
₂ 70
Weight [kg] ₁ 11,3
₂ 11,3
Intake opening [mm] Ø 38 mm (outside)
Exhaust opening [Ø mm] Ø 38 mm (outside)
Ambient temp. [°C] -20°C bis +60°C
Type of protection IP 54
Measurements L x B x H [mm] 283 x 244 x 266,5
optional capacitor 230 V; 40 µF / V
Ask about this product
Back
FaLang translation system by Faboba