High pressure blower HD150

Article no.: 5800424

1,30 m³ / min - 15000 Pa (150mbar)

HERZ– high-pressure blower:

Low noise level
Maintenance-free
Compact design
Completely oil-free
Frequency converter suitable.
Thermal contact (PTO) as standard.
Includes air filter and 1x hose adapter 38mm.

The operating temperature of the high-pressure blower may not exceed 60°C.

All blowers are suitable for operation with frequency converters for speed control. HD150 blower is equipped with a bimetal switch, whose signal can be evaluated using an optional tripping unit. The technical data remain unchanged.

In the standard version the blowers are provided with a steel filter on the intake side, which can be used again after it has been cleaned with compressed air. When a fine filter is used, the stainless steel filter must be removed.

Type: side channel blower. Special version: also available with UL certification.

Technical data

Volumetric current [m³/min]	₁ 1,30 ₂ 1,50
Overall pressure difference [Pa]	₁ 15000 ₂ 20000
Voltage [V]	₁ Y/Δ 200 – 255 / 346 – 440 ₂ Y/Δ 200 – 277 / 346 – 480
Frequency [hz]	₁ 50 ₂ 60
Current draw [A]	₁ Y/Δ 1,73 – 2,10 / 1,00 – 1,20 ₂ Y/Δ 2,00 – 2,50 / 1,15 – 1,45
Speed [rpm]	₁ 2855 ₂ 3450
Motor power [KW]	₁ 0,55 ₂ 0,65
Noise pressure level [LpA(dp)]	₁ 64 – 73 ₂ 69 – 76
Weight [kg]	₁ 12 ₂ 12
Intake opening [mm]	G1 1/4Zoll
Exhaust opening [Ø mm]	G1 1/4Zoll / Ø 38 mm Adapter (außen)
Ambient temp. [°C]	-20°C bis +60°C
Type of protection	IP 55
Measurements L x B x H [mm]	283 x 241 x 268
optional	Kondensator 230 V; 40 µF / V