High-pressure blower HD240

Article no.: 5100200

3,65 m³ / min - 27000 Pa

HERZ– high-pressure blower:

Low noise level
Maintenance-free
Compact design
Completely oil-free

All blowers are suitable for operation with frequency converters for speed control. The HD240 blower is equipped with a bimetal switch (PTO), whose signal can be evaluated using an optional tripping unit. The technical data remain unchanged.

In the standard version, the blowers are equipped on the suction side with a stainless steel filter, which can be reused after cleaning with compressed air. When using a fine filter, the stainless steel filter can be removed.

The operating temperature of the high-pressure blower may not exceed 60°C.

Specail version also available with UL cerification

Type: side channel blower.

Here you can find all models in comparison [click here!]

Technical data

Volumetric current [m³/min]	₁ 3,65 ₂ 4,42
Overall pressure difference [Pa]	₁ 25000 ₂ 26000
Voltage [V]	₁ 3x 230 - 400 ₂ 3x 265 - 460
Frequency [hz]	₁ 50 ₂ 60
Current draw [A]	₁ 5,1 ₂ 5,1
Speed [rpm]	₁ 2900 ₂ 3500
Motor power [KW]	₁ 2,20 ₂ 2,55
Noise pressure level [LpA(dp)]	₁ 68,8 ₂ 70,8
Weight [kg]	₁ 26,5 ₂ 26,5
Intake opening [mm]	Ø 60 mm (outside)
Exhaust opening [Ø mm]	Ø 60 mm (outside)
Ambient temp. [°C]	-15°C bis +40°C
Type of protection	IP 54
Measurements L x B x H [mm]	397 x327 x 365